| ProtoMat® H100 |
| Part # |
111424 |
| Working area (X/Y) |
15” x 14.4” (380 x 365 mm) |
| Resolution (X/Y) |
0.01 mil (0.25 µm) |
| Repeatability |
±0.04 mil (±0.001 mm) |
| Precision of front-to-back alignment |
±0.8 mil (±0.02 mm) |
| Milling motor |
Max. 100,000 rpm, software controlled |
| Tool change |
Automatic, 30 tools |
| Tool collet |
1/8” (3.175 mm), pneumatic release collet |
| Drilling speed |
120 strokes/min |
| Travel speed (max) |
Max. 6”/sec (150 mm/sec) |
| X/Y positioning system |
3-phase stepper motors |
| Z drive |
Pneumatic (14 mm/0.55”) |
| Dimensions (W/H/D) |
25.6” x 17” x 29.5” (650 x 430 x 750 mm) |
| Weight |
110 lbs (50 kg) |
| Power supply |
115/230 V, 50-60 Hz, 200 W |
| Compressed air supply |
6 bar (87psi), 100 l/min. (3.528 cfm) |
*Specifications subject to change |
